FujiFilm CR-IR341 Service Manual page 377

1 2
C
ONTENTS
03C7 Driven Shaft Grip Error / 03C9 Driven Shaft Grip Release Error
03CB Driven Shaft Grip Self-Diagnostics Error
Cause
03C7: MZ3 is driven during IP reading conveyance, but SZ3 does not turn OFF (IP not
ungripped).
03C09: MZ3 is driven during IP reading conveyance, but SZ3 does not turn ON (IP not
gripped).
03CB: MZ2 is driven during initialization, but SZ3 does not turn OFF.
Supplementary explanation
During IP reading conveyance or during initialization, MZ3 is driven to perform the grip/
grip release operation.
Either grip or grip release is detected as SZ3 turns ON/OFF.
When SZ3 is OFF, it is detected as grip; when SZ3 is ON, it is detected as grip re-
lease.
This error occurs when SZ3 does not transition from ON to OFF, or from OFF to ON,
during the above operation.
Sensor related
Error-related I/O locations
Error-related system block diagram
AC IN
DC OUT2
JPS-1
DC OUT3
009-051-04
05.31.99 FM2460
3 4 5 6
ON: Close, OFF: Open
SOLA4
SNS08A
CN
CN9
CN13
CN4
DRV03D
CN3
CN3
CN14
DRV08A
CN1
CR-IR341 Service Manual
MZ3 Driven shaft grip
SZ3 Driven-side grip release
HP sensor
FR1H0057.EPS
CNZ2
CNZ3
CNZ8
MZ3
CNZ9
FR1H0058.EPS
MT - 108
MT - 108