Table 1032. Snfa1 Register Field Descriptions - STMicroelectronics SPC572L series Reference Manual

RM0400
0x12 (State0)
0x14 (State1)
0x16 (State2)
0x18 (State3)
Offset
0x1A (State4)
0x1C(State5)
0x1E (State6)
0x20 (State7)
31 30 29 28 27
R 0 0 0 0
W
Reset 0 0 0 0 0
The SnFA1 register fields are described in
Field
0–11
Action 3 to be performed for State n false condition. The decoding of these bits is defined in
Table 1028
ACTION3
12–15 Reserved
16–27
Action 4 to be performed for State n false condition. The decoding of these bits is defined in
Table 1028
ACTION4
28–31 Reserved
63.5.1.6.5 Trace group configuration registers (DTMGC, PTMGC, OTMGC and WTMGC)
There are four action trace groups and a configuration register for each trace group:
•
DTM trace—clients are configured with the DTM trace group configuration (DTMGC)
register
•
PTM trace—clients are configured with the PTM trace group configuration (PTMGC)
register
•
OTM trace—clients are configured with the OTM trace group configuration (OTMGC)
register
•
WTM trace—clients are configured with the WTM trace group configuration (WTMGC)
register
Each of these groups are specific to a trace. Any number of clients can be enabled for one
trace using the action trace group.
Figure 1090
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
ACTION4
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Figure 1089. SnFA1 register format

Table 1032. SnFA1 register field descriptions

shows the format of the trace group configuration registers.
DocID027809 Rev 4
Sequence Processing Unit (SPU)
0 0 0 0
Table 1032.
Description
Access: User read/write
8 7 6 5 4 3 2 1
ACTION3
1849/2058
0
1863