Policy List Parent Group Configuration Mode; Policy Parameter Configuration Mode; Pppoe Service Name Table Configuration Mode - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Policy List Parent Group Configuration Mode

Policy Parameter Configuration Mode

PPPoE Service Name Table Configuration Mode

Copyright © 2010, Juniper Networks, Inc.
sleep
suspend
traffic-class
traffic-shape-profile
user-packet-class
In this mode, you can configure a parent group in a hierarchy.
From Policy List Configuration Mode, type the parent-group command and specify a
parentGroupName, and press Enter.
host1(config)#policy-list grouppol1
host1(config-policy-list)#parent-group group1
host1(config-policy-list-parent-group)#?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
rate-limit-profile Specify the hierarchical rate limit profile
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified
In this mode, you can configure a policy parameter.
From Global Configuration mode, type the policy-parameter command and specify a
policyParameterType, the hierarchical keyword, and press Enter.
host1(config)#policy-parameter param1 hierarchical
host1(config-policy-parameter)#?
aggregation-node Configure the aggregation node value
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified time
In this mode, you can configure entries for a PPPoE service name table. PPPoE clients
use these entries to request that an access concentrator (AC), such as an E Series router,
support certain services. Issue the service command from this mode to configure a
specific service name entry, or to specify that the AC should ignore (drop), rather than
respond to (terminate, the default action), a PPPoE Active Discovery Initiation (PADI)
request from a client containing the empty service name tag.
Make the Command Interface pause for a specified
duration
Suspend a policy rule
Create a traffic class policy
Create a traffic-shape policy
Create a user packet class policy
Chapter 2: Command-Line Interface
101