Ip Policy-Parameter Hierarchical - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip policy-parameter hierarchical

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
ip policy-parameter hierarchical parameterName { nodeValue | atm | atm-vc | atm-vp
vpValue | ethernet | fr-vc | forwarding |
ppp-interface | svlan svlanValue | vlan }
no ip policy-parameter parameterName
Command introduced in JunosE Release 8.0.0.
ppp-interface keyword added in JunosE Release 10.3.0.
Specifies a parameter value for IP interfaces. The no version removes the policy parameter
and its contents.
parameterName—Name of policy parameter
nodeValue— Aggregation node number in the range 1–65535
vpValue—ATM VPI number in the range 0–255
svlanValue—S-VLAN ID number in the range 0–4095
Interface Configuration, Profile Configuration
Creating a Classifier Group for a Policy List
Chapter 10: I Commands
907