Ip Pim Send-Rp-Discovery Scope - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip pim send-rp-discovery scope

Syntax
Release Information
Description
Options
Mode
900
ip pim send-rp-discovery scope ttl [ interfaceType interfaceSpecifier ]
no ip pim send-rp-discovery
Command introduced before JunosE Release 7.1.0.
Configures the router as an RP mapping agent, which records RP-to-group mappings
and notifies PIM DRs about the mappings. The no version stops the router from acting
as an RP mapping agent.
ttl—Time-to-live value; number of hops for which the RP discovery message is valid.
Specify a value that covers the PIM domain.
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
"Interface Types and Specifiers" on page 5. If you specify an interface, the autoRP
discovery messages will contain the IP address for this interface.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.