Ip Split-Horizon - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip split-horizon

Syntax
Release Information
Description
Mode
946
[ no ] ip split-horizon
Command introduced before JunosE Release 7.1.0.
Enables split horizon, preventing the RIP router from advertising routes from the interface
originating the route, reducing the possibility of routing loops; this is the default condition.
The no version disables split horizon.
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.