Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
ip pim query-interval
Syntax
Release Information
Description
Options
Mode
896
ip pim query-interval queryTime
no ip pim query-interval
Command introduced before JunosE Release 7.1.0.
Profile Configuration mode added in JunosE Release 8.2.0.
Specifies how often the router sends PIM router query messages from this interface. The
no version specifies the default time interval, 30 seconds.
queryTime—Interval in the range 0–210 seconds at which the router sends PIM router
query messages from this interface
Interface Configuration, Profile Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?
Questions and answers