Ip Pim Join-Filter - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

Software for e series broadband services routers command reference a to m
Hide thumbs Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
Table of Contents

Advertisement

JunosE 11.2.x Command Reference Guide A to M

ip pim join-filter

Syntax
Release Information
Description
Options
Mode
894
ip pim join-filter accessListName
no ip pim join-filter
Command introduced before JunosE Release 7.1.0.
Profile Configuration mode added in JunosE Release 8.2.0.
Specifies an extended access list that you want this PIM interface to use as a join filter.
If an interface-level filter exists, it takes precedence over the global-level filter. The no
version removes the filter association.
accessListName—Name of the access list that you want this interface to use as a PIM
join filter; a string of up to 32 alphanumeric characters
Global Configuration, Interface Configuration, Profile Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents