Ip Ospf Dead-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip ospf dead-interval

Syntax
Release Information
Description
Options
Mode
880
ip ospf dead-interval deadInterval
no ip ospf dead-interval
Command introduced before JunosE Release 7.1.0.
Sets the time period during which the router's neighbors do not see hello packets before
they declare the router to be down. The no version resets the dead interval to its default.
deadInterval—Number in the range 0–2147483647 seconds; default value is 40 seconds
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.