Ip Ospf Authentication Message-Digest - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip ospf authentication message-digest
Syntax
Release Information
Description
Mode
876
[ no ] ip ospf authentication message-digest
Command introduced before JunosE Release 7.1.0.
Specifies that the authentication mode for the interface is MD5. The no version sets
authentication for the interface to none, but leaves any configured MD5 key intact.
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
