Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
ip ospf authentication message-digest
Syntax
Release Information
Description
Mode
876
[ no ] ip ospf authentication message-digest
Command introduced before JunosE Release 7.1.0.
Specifies that the authentication mode for the interface is MD5. The no version sets
authentication for the interface to none, but leaves any configured MD5 key intact.
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?