Ip Ospf Network - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

ip ospf network

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ospf network { broadcast | non-broadcast | point-to-point }
no ip ospf network
Command introduced before JunosE Release 7.1.0.
Configures the OSPF network type to something other than the default for the network
medium. The no version restores the default value for the medium.
broadcast—Sets the network type to broadcast
non-broadcast—Sets the network type to NBMA
point-to-point—Sets the network type to point-to-point
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
883