Show Config - Enterasys Matrix DFE-Gold Series Configuration Manual

show config

!
# cdp
!
# console
!
show config
Use this command to display the system configuration or write the configuration to a file.
Syntax
show config [all] [facility] [outfile outfile]
Parameters
all
facility
outfile outfile
Defaults
If no parameters are specified, only non‐default system configuration settings will be displayed.
Mode
Switch, Read‐Write.
Example
This example shows how to display the current non‐default device configuration:
Matrix(su)->show config
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
# Router Configuration
begin router
router
enable
config t
router id
(Optional) Displays default and non‐default configuration settings.
(Optional) Displays the configuration for a specific facility.
(Optional) Specifies a file in which to store the configuration.
2.2.2.2
Managing Configuration and Image Files
Enterasys Matrix DFE-Gold Series Configuration Guide 2-85