Show Cos Settings - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Policy Class of Service (CoS)
Parameters
all | group‐type‐index
reference
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear all Class of Service transmit queue reference entries:
Matrix(rw)->clear cos reference txq all

show cos settings

Use this command to display Class of Service parameters.
Syntax
show cos settings [cos-list]
Parameters
cos‐list
Defaults
If not specified, all CoS entries will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to show all CoS settings:
Matrix(rw)->show cos settings
* Means attribute has not been configured
CoS Index
---------
0
1
2
3
4
5
8-38 Policy Classification Configuration
Clears all non‐default transmit queue reference entries or a specific
entry.
Specifies a reference number of the entry to be cleared.
(Optional) Specifies a Class of Service entry to display.
Priority ToS
---------- -------
0 *
1 *
2 *
3 *
4 *
5 *
TxQ IRL
----- -----
0 *
2 *
4 *
6 *
8 *
10 *
show cos settings