Clear Rmon Topn; Show Rmon Matrix - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring RMON
Parameters
index
enable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable RMON TopN entry 1:
Matrix(rw)->set rmon topN status 1 enable

clear rmon topN

Use this command to delete an RMON TopN entry.
Syntax
clear rmon topN index
Parameters
index
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete RMON TopN entry 1:
Matrix(rw)->clear rmon topN 1

show rmon matrix

Use this command to display RMON matrix properties and statistics. The RMON matrix stores
statistics for conversations between sets of two addresses.
Syntax
show rmon matrix [port-string] [source | dest]
11-32 Network Monitoring Configuration
Specifies an index number for this entry. Maximum number of entries is
10. Maximum value is 65535.
Enables this TopN entry.
Specifies the index number of the entry to be cleared.
clear rmon topN