Show Ip Ospf Database Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring OSPF
nssa‐external
database‐summary
Defaults
If link‐state‐id is not specified, the specified type of database records will be displayed for all link
state IDs.
Mode
Router command, Any router mode.
Example
This example shows how to display all OSPF link state database information:
Matrix>Router#show ip ospf database
OSPF Router with ID(182.127.64.1)
LinkID
182.127.63.1
LinkID
182.127.64.1
182.127.62.1
LinkID
182.127.63.1
Table 21‐3 provides an explanation of the command output.
Table 21-3 show ip ospf database Output Details
Output...
Link ID
ADV Router
Age
Seq#
21-44 Routing Protocol Configuration
Displays nssa‐external (Type 7) link state records in their detailed
format. Type 7 records are originated by ASBRs.
Displays a numerical summary of the contents of the link state
database.
Displaying Net Link States(Area 0.0.0.0)
ADV Router
182.127.62.1
Displaying Router Link States(Area 0.0.0.0)
ADV Router
182.127.64.1
182.127.62.1
Displaying Summary Net Link States(Area 0.0.0.0)
ADV Router
182.127.62.1
What it displays...
Link ID, which varies as a function of the link state record type, as
follows:
Router ID of the router originating the link state record.
Age (in seconds) of the link state record.
OSPF sequence number assigned to each link state record.
Age Seq#
956 0x80000001
Age Seq#
308 0x8000000f
952 0x8000001b
Age Seq#
956 0x80000001
• Net Link States ‐ Shows the interface IP address of the
designated router to the broadcast network.
• Router Link States ‐ Shows the ID of the router
originating the record.
• Summary Link States ‐ Shows the summary network
prefix.
show ip ospf database
Checksum
0xb6ca
Checksum LinkCount
0x636b 2
0x7ed7 1
Checksum
0xb6ca