Enterasys Matrix DFE-Gold Series Configuration Manual page 752

Configuring DVMRP
Mode
Router command, Any router mode.
Example
This example shows how to display DVMRP routing table entries. In this case, the routing table
has 5 entries. The first entry shows that the source network 60.1.1.0/24 can be reached via next‐hop
router 40.1.1.3. This route has a metric of 2. It has been in the DVMRP routing table for 1 hour, 24
minutes and 2 seconds and will expire in 2 minutes and 3 seconds. It supports flag messages for
verifying neighbors, pruning, generation ID and netmask in prunes and grafts (VPGN):
Matrix>Router#show ip dvmrp route
flag characters used:
-------------
V Neighbor is verified.
P Neighbor supports pruning.
G Neighbor supports generation ID.
N Neighbor supports netmask in prunes and grafts.
S Neighbor supports SNMP.
M Neighbor supports mtrace.
----------------
DVMRP Routing Table - 5 entries
60.1.1.0/24 [2] uptime: 1:24:2, expires: 0:2:3
via neighbor: 40.1.1.3 version: 3.255
50.50.50.0/24 [2] uptime: 1:24:18, expires: 0:1:25
via neighbor: 30.1.1.1 version: 3.255
40.40.40.0/24 [2] uptime: 1:24:2, expires: 0:2:3
via neighbor: 40.1.1.3 version: 3.255 flags: VPGN gen id: 0x336ff052 40.1.1.0/
24 [1] uptime: 1:24:8, expires: 0:0:0
via: local
30.1.1.0/24 [1] uptime: 1:24:20, expires: 0:0:0
via: local
21-54 Routing Protocol Configuration
flags: VPGN gen id: 0x336ff052
flags: VPGN gen id: 0xaa4ee1fa
show ip dvmrp route