Table of Contents
Advertisement
Gathering Technical Support Information
Gathering Technical Support Information
Purpose
To gather common technical support information.
Command
For information about...
show support
show support
Use this command to display output for technical support‐related commands.
Syntax
show support [filename]
Parameters
filename
Defaults
The following commands are executed:
•
show version ("show version" on page 2‐48)
•
show system hardware ("show system hardware" on page 2‐35)
•
show vlan ("show vlan" on page 7‐3)
•
show vlan static ("show vlan" on page 7‐3)
•
show logging all ("show logging all" on page 10‐2)
•
show snmp counters ("show snmp counters" on page 5‐6)
•
show port status ("show port status" on page 4‐14)
•
show spantree status ("show spantree stats" on page 6‐6)
•
show spantree blockedports ("show spantree blockedports" on page 6‐54)
•
show ip address ("show ip address" on page 2‐31)
•
show ip route ("show ip route" on page 10‐60)
•
show netstat ("show netstat" on page 10‐17)
•
show arp ("show arp" on page 10‐57)
•
show system utilization ("show system utilization" on page 2‐37)
•
show config ("show config" on page 2‐85)
Mode
Switch command, Read‐Only.
2-98 Startup and General Configuration
(Optional) Filename (slotN/name) to save output.
show support
Refer to page...
2-98
- Quick Links:
- Set Ip Address
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Enterasys Matrix DFE-Gold Series and is the answer not in the manual?