Configuring Network Address Translation (NAT)
Route Table Limit
TWCB maximum Bindings
TWCB Cache size
TWCB maximum Configs
This example displays the NAT cache‐size limit for this system:
Matrix(su)->show router limits nat-cache
NAT Cache size
clear router limits (NAT)
Use this command to reset NAT router limits to the default values.
Syntax
clear router limits [nat-bindings] [nat-cache] [nat-dynamic-config]
[nat-static-config] [nat-interface-config] [nat-global-addr-cfg]
[nat-global-port-cfg]
Parameters
nat‐bindings
nat‐cache
nat‐dynamic‐configs
nat‐static‐config
nat‐interface‐config
nat‐global‐addr‐cfg
nat‐global‐port‐cfg
Defaults
If no parameters are specified, all router limits are reset, including TWCB, LSNAT and route‐table
router limits.
Mode
Switch Command: Matrix(rw)‐>.
Usage
18-16 Network Address Translation (NAT) Configuration
(Optional) Specifies the resetting of NAT binding router limits to the
default value.
(Optional) Specifies the resetting of NAT cache size router limits to the
default value.
(Optional) Specifies the resetting the number of NAT dynamic mapping
configurations to the default value.
(Optional) Specifies the resetting the number of NAT static mapping
configurations to the default value.
(Optional) Specifies the resetting the number of configured NAT VLAN
interfaces to the default value.
(Optional) Specifies the resetting the number configurable global
addresses to the default value.
(Optional) Specifies the resetting the number of configurable global
ports to the default value.
Note: Router limits can also be cleared in the following contexts:
To clear LSNAT router limits see
To clear TWCB router limits see
If you do not specify a parameter when issuing a clear router limits command, router limits for all
contexts are reset to the default value.
-
12000
-
32000
-
2000
-
-
2000
clear router limits (LSNAT) on page
clear router limits (TWCB) on page
clear router limits (NAT)
(default)
(default)
(default)
1
(default)
(default)
19-34.
23-17.
Need help?
Do you have a question about the Enterasys Matrix DFE-Gold Series and is the answer not in the manual?
Questions and answers