Inservice (Real Server); Faildetect (Real Server) - Enterasys Matrix DFE-Gold Series Configuration Manual

inservice (real server)

inservice (real server)
Use this command to enable a real LSNAT server.
Syntax
inservice
no inservice
Parameters
None.
Defaults
None.
Mode
Router command, SLB Real Server Configuration mode: Matrix>Router(config‐slb‐real)#
Usage
The "no" form of this command removes the real server from service.
Example
This example shows how to enable the real server IP 10.1.2.3 in the "httpserver" server farm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#inservice

faildetect (real server)

Use this command to configure which method (type) is used to detect whether an LSNAT server is
up or down.
Syntax
faildetect {type {both | ping | app [upd] | acv [udp]}} | ping-int seconds ping-
retries number | app-int seconds app-retries number
no faildetect
Configuring Load Sharing Network Address Translation (LSNAT)
Enterasys Matrix DFE-Gold Series Configuration Guide 19-13