show ssh state
Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.
Commands
For information about...
show ssh state
set ssh
set ssh hostkey
show router ssh
set router ssh
clear router ssh
show ssh state
Use this command to display the current status of SSH on the device.
Syntax
show ssh state
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display SSH status on the device:
Matrix(rw)->show ssh state
SSH Server status:
set ssh
Use this command to enable, disable or reinitialize SSH server on the device.
Syntax
set ssh {enable | disable | reinitialize}
Disabled.
Enterasys Matrix DFE-Gold Series Configuration Guide 24-11
Configuring Secure Shell (SSH)
Refer to page...
24-11
24-11
24-12
24-12
24-13
24-13