Show Snmp Access Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

show snmp access
• If volatile, nonvolatile or read‐only are not specified, all entries of all storage types will be
displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display SNMP access information:
Matrix(rw)->show snmp access
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Table 5‐7 shows a detailed explanation of the command output.
Table 5-7 show snmp access Output Details
Output...
Group
Security model
Security level
Read View
Write View
Notify View
= SystemAdmin
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
= NightOperator
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
What it displays...
SNMP group name.
Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).
Security level applied to this group. Valid levels are:
• noAuthNoPrivacy (no authentication required)
• AuthNoPrivacy (authentication required)
• authPriv (privacy -- most secure level)
Name of the view that allows this group to view SNMP MIB objects.
Name of the view that allows this group to configure the contents of the
SNMP agent
Name of the view that allows this group to send an SNMP trap
message.
.
Enterasys Matrix DFE-Gold Series Configuration Guide 5-19
Configuring SNMP Access Rights