Maxconns; Inservice - Enterasys Matrix DFE-Gold Series Configuration Manual

maxconns

maxconns
Use this command to limit the maximum number of connections to the server.
Syntax
maxconns number
Parameters
number
Defaults
None.
Mode
Router command, Cache Server Configuration mode: Matrix(rw)‐>Router(config‐twcb‐cache)#.
Example
This example sets the maximum number of connections for cache server 186.89.10.51 to 1000:
Matrix(rw)->Router(config)#ip twcb wcserverfarm s1Server
Matrix(rw)->Router(config-twcb-wcsfarm)#cache 186.89.10.51
Matrix(rw)->Router(config-twcb-cache)#maxconns 1000

inservice

Use this command to activate this cache server or web‐cache.
Syntax
inservice
Parameters
None.
Defaults
None.
Mode
Router command, Cache Server Configuration: Matrix(rw)‐>Router(config‐twcb‐cache)# or
Web‐Cache Configuration mode: Matrix(rw)‐>Router(config‐twcb‐webcache)#.
Usage
Enter the inservice command after all other parameters are configured for the cache server or
web‐cache context.
At least one cache server must be in service in order to place a web‐cache in service.
Specifies the maximum number of connections allowed for this server.
Values range from 1 to 5000. Default value of 5000.
Enterasys Matrix DFE-Gold Series Configuration Guide 23-7
Understanding Transparent Web Cache Balancing (TWCB)