Show Router Limits (Nat) - Enterasys Matrix DFE-Gold Series Configuration Manual

show router limits (NAT)

Example
This example sets the maximum NAT cache size to 1000:
Matrix(rw)->set router limits nat-cache 1000
show router limits (NAT)
Use this command to display NAT router limit configuration settings.
Syntax
show router limits [nat-bindings] [nat-cache] [nat-dynamic-config]
[nat-static-config] [nat-interface-config] [nat-global-addr-cfg]
[nat-global-port-cfg]
Parameters
nat‐bindings
nat‐cache
nat‐dynamic‐configs
nat‐static‐config
nat‐interface‐config
nat‐global‐addr‐cfg
nat‐global‐port‐cfg
Defaults
If no parameters are specified, all router limits are displayed, including TWCB and LSNAT.
Mode
Switch command mode: Matrix(rw)‐>.
Usage
This command must be entered in switch command mode.
Examples
This example displays all router limits for this system:
Matrix(su)->show router limits
LSNAT maximum Bindings
LSNAT Cache size
LSNAT maximum Configs
NAT maximum Bindings
NAT Cache size
NAT maximum dynamic mapping Configs
NAT maximum static mapping Configs
NAT maximum Interface Configs
NAT maximum global address Configs
NAT maximum global port Configs
(Optional) Displays the NAT maximum bindings limit.
(Optional) Displays the NAT cache size limit.
(Optional) Displays the NAT dynamic configuration limit.
(Optional) Displays the NAT static mappings configuration limit.
(Optional) Displays the NAT interface configuration limit.
(Optional) Displays the NAT global address configuration limit.
(Optional) Displays the NAT global port configuration limit.
Enterasys Matrix DFE-Gold Series Configuration Guide 18-15
Configuring Network Address Translation (NAT)
- 32000 (default)
- 2000 (default)
- 50 (default)
- 32000 (default)
- 2000 (default)
- 10 (default)
- 50 (default)
- 103 (default)
- 1000 (default)
- 32000 (default)