Clear Linkflap Action; Set Linkflap Threshold - Enterasys Matrix DFE-Gold Series Configuration Manual

clear linkflap action

Mode
Switch command, Read‐Write.
Examples
This example shows how to set the link flap violation action on port fe.1.4 to generating a Syslog
entry:
Matrix(rw)->set linkflap action fe.1.4 gensyslogentry
clear linkflap action
Use this command to clear reactions to a link flap violation.
Syntax
clear linkflap action [port-string} {disableInterface | gensyslogentry | gentrap
| all}
Parameters
port‐string
disableInterface |
gensyslogentry |
gentrap | all
Defaults
If port‐string is not specified, actions will be cleared on all ports.
Mode
Switch command, Read‐Write.
Examples
This example shows how to clear all link flap violation actions on all ports:
Matrix(rw)->clear linkflap action all

set linkflap threshold

Use this command to set the link flap action trigger count.
Syntax
set linkflap threshold port-string threshold_value
(Optional) Specifies the port(s) on which to clear the link flap action. For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Clears the reaction of:
• Disabling the interface
• Generating a Syslog entry
• Generating an SNMP trap message, or
• All of the above.
Enterasys Matrix DFE-Gold Series Configuration Guide 4-45
Configuring Link Traps and Link Flap Detection