Bootfile; Next-Server - Enterasys Matrix DFE-Gold Series Configuration Manual

bootfile

Usage
This command configures DHCP option 3.
The ʺnoʺ form of this command deletes the default router list.
Example
This example shows how to assign a default router at 14.12.1.99 to the "localpool" address pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#default-router 14.12.1.99
bootfile
Use this command to specify the default boot image for a DHCP client.
Syntax
bootfile filename
no bootfile
Parameters
filename
Defaults
None.
Mode
Router command, Any DHCP configuration mode.
Usage
The "no" form of this command deletes the boot image association.
Example
This example shows how to specify "dhcpboot" as the boot image file in the "localpool" address
pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#bootfile dhcpboot

next-server

Use this command to specify the next server in the DHCP server boot process.
Syntax
next-server ip-address
no next-server ip-address
Specifies the boot image file name.
Enterasys Matrix DFE-Gold Series Configuration Guide 20-13
DHCP Overview