Show Rmon Stats - Enterasys Matrix DFE-Gold Series Configuration Manual

show rmon stats

show rmon stats
Use this command to display RMON statistics measured for one or more ports.
Syntax
show rmon stats [port-string] [wide] [bysize]
Parameters
port‐string
wide
bysize
Defaults
If port‐string is not specified, RMON stats will be displayed for all ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display RMON statistics for Fast Ethernet port 20 in module 1:
Matrix(rw)->show rmon stats fe.1.20
Port: fe.1.20
--------------------
Index
Owner
Data Source
Drop Events
Collisions
Jabbers
Broadcast Pkts = 0
Multicast Pkts = 0
CRC Errors
Undersize Pkts = 0
Oversize Pkts
Fragments
Table 11‐3 provides an explanation of the command output.
(Optional) Displays RMON statistics for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
(Optional) Display most important stats, one line per entry.
(Optional) Display counters by packet length.
= 1011
= monitor
= 1.3.6.1.2.1.2.2.1.1.51021
= 0 Packets
= 0 Octets
= 0 0
65
128
= 0 256
512
= 0 1024 - 1518 Octets = 0
= 0
= 0
= 0
- 64 Octets = 0
- 127 Octets = 0
- 255 Octets = 0
- 511 Octets = 0
- 1023 Octets = 0
Enterasys Matrix DFE-Gold Series Configuration Guide 11-15
Configuring RMON