Commands; Purpose - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Port Web Authentication (PWA)
• allow access to a server (at IP 1.2.3.4) that acts as both a DNS and DHCP server, and
• be assigned as the default policy profile for all Fast Ethernet ports.
Matrix(rw)->set policy rule 1 ether 0x806 forward
Matrix(rw)->set policy rule 1 ipdest 1.2.3.4 forward
Matrix(rw)->set policy rule 1 udpdest 67 forward
Matrix(rw)->set policy rule 1 updsource 68 forward
Matrix(rw)->set policy port fe.*.* 1
Also, the PWA client must be configured (statically, or through DHCP) to have routes to both the
resolved URL (a local route, or an actual gateway) and the PWA IP address. DHCP may be
configured to explicitly return a static route for the client, or to inform the client that all routes are
local (meaning the client is its own default gateway).
For more information on configuring policy profiles, refer to Chapter
For more information on configuring DHCP, refer to "DHCP Overview" on page 20‐1.

Purpose

To review, enable, disable, and configure Port Web Authentication (PWA).

Commands

For information about...
show pwa
set pwa
set pwa hostname
clear pwa hostname
show pwa banner
set pwa banner
set pwa displaylogo hide
clear pwa banner
set pwa displaylogo
set pwa redirecttime
set pwa ipaddress
set pwa protocol
set pwa enhancedmode
set pwa guestname
clear pwa guestname
set pwa guestpassword
set pwa gueststatus
set pwa initialize
set pwa quietperiod
25-12 Authentication Configuration
clear dot1x auth-config
8.
Refer to page...
25-13
25-15
25-15
25-16
25-16
25-17
25-17
25-17
25-18
25-18
25-19
25-19
25-20
25-21
25-21
25-22
25-22
25-23
25-23