Set Igmp Remove-Static - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring IGMP
modify
include‐ports
exclude‐ports
Defaults
If not specified, the static entry will be created and not modified.
Mode
Switch command, Read‐Write.
Example
This example shows how to add port fe.1.3 to the IGMP group at 224.0.2 (VLAN 105):
Matrix(rw)->set igmp add-static 224.0.0.2 105 modify include-ports fe.1.3

set igmp remove-static

Use this command to delete a static IGMP entry, or to remove one or more ports from an existing
entry.
Syntax
set igmp remove-static group vlan-list [modify] [include-ports] [exclude-ports]
Parameters
group
vlan‐list
modify
include‐ports
exclude‐ports
Defaults
If not specified, the static entry will be removed and not modified.
Mode
Switch command, Read‐Write.
Example
This example shows how to remove port fe.1.3 from the IGMP group at 224.0.2 (VLAN 105):
Matrix(rw)->set igmp remove-static 224.0.0.2 105 modify include-ports fe.1.3
9-12 IGMP Configuration
(Optional) Adds new ports to an existing entry.
(Optional) Port or range of ports.
(Optional) Port or range of ports.
Specifies a group IP address for the entry.
Specifies the VLAN(s) on which to configure the entry.
(Optional) Adds new ports to an existing entry.
(Optional) Port or range of ports.
(Optional) Port or range of ports.
set igmp remove-static