Show Ip Slb Conns - Enterasys Matrix DFE-Gold Series Configuration Manual

show ip slb conns

Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#exit
Matrix>Router(config)#ip slb vserver virtual-http
Matrix>Router(config-slb-vserver)#serverfarm httpserver
Matrix>Router(config-slb-vserver)#virtual 10.1.4.5 tcp www
Matrix>Router(config-slb-vserver)#persistence level tcp 360
Matrix>Router(config-slb-vserver)#allow accessservers 10.24.16.12 10.24.16.42
Matrix>Router(config-slb-vserver)#inservice
show ip slb conns
Use this command to display active server load balancing connections.
Syntax
show ip slb conns [detail | vserver virtualserver [detail] | client client-ip
[detail]]
Parameters
detail
vserver virtualserver
client client‐ip
Defaults
If no parameters are specified, summary information about all active connections will be
displayed.
If detail is not specified, summary information will be displayed.
Mode
Router command, Any router mode.
Examples
This example shows how to display summary information about active server load balancing
connections:
Matrix>Router#show ip slb conns
flo-id real-server-ip
-----------------------------------------------------------------
7
6
5
3
2
(Optional) Displays detailed output for a specific virtual server, a
specific client, or for all configured virtual servers and clients.
(Optional) Specifies a virtual server name for which to display
information.
(Optional) Specifies a client IP for which to display information.
client-ip
192.169.1.10 192.168.1.137
192.169.2.13 192.168.1.137
192.169.2.13 192.168.1.137
192.169.2.14 192.168.1.253
192.169.2.14 192.168.1.253
Configuring Load Sharing Network Address Translation (LSNAT)
rport cl-prt ptcl state
23 1063 TCP
1128 * TCP
21 * TCP
1084 * TCP
21 * TCP
Enterasys Matrix DFE-Gold Series Configuration Guide 19-29
OUT-SERVR REPLY
OUT-SERVR REPLY
OUT-SERVR REPLY
OUT-SERVR REPLY
OUT-SERVR REPLY