Configure; Copy - Enterasys Matrix DFE-Gold Series Configuration Manual

Managing Configuration and Image Files
interface loopback 1
ip address 2.2.2.2 255.255.255.255
no shutdown
.
.
.
end

configure

Use this command to execute a previously downloaded configuration file stored on the device.
Syntax
configure filename [append]
Parameters
filename
append
Defaults
If append is not specified, the current running configuration will be replaced with the contents of
the configuration file, which will require an automated reset of the chassis.
Mode
Switch, Read‐Write.
Example
This example shows how to execute the "myconfig" file in the module in slot 1:
Matrix(rw)->configure slot1/myconfig

copy

Use this command to upload or download an image or a CLI configuration file.
Syntax
copy source destination
2-86 Startup and General Configuration
Specifies the path and file name of the configuration file to execute.
(Optional) Executes the configuration as an appendage to the current
configuration. This is equivalent to typing the contents of the config file
directly into the CLI and can be used, for example, to make incremental
adjustments to the current configuration.
configure