Purpose; Configuring Spanning Tree Loop Protect Features; Commands; Set Spantree Lp - Enterasys Matrix DFE-Gold Series Configuration Manual

set spantree lp

Configuring Spanning Tree Loop Protect Features

Purpose

To display and set Spanning Tree Loop Protect parameters, including the global parameters of
Loop Protect threshold, window, enabling traps, and disputed BPDU threshold, as well as per port
and port/SID parameters. See "Loop Protect" on page
Protect feature.

Commands

For information about...
set spantree lp
show spantree lp
clear spantree lp
show spantree lplock
clear spantree lplock
set spantree lpcapablepartner
show spantree lpcapablepartner
clear spantree lpcapablepartner
set spantree lpthreshold
show spantree lpthreshold
clear spantree lpthreshold
set spantree lpwindow
show spantree lpwindow
clear spantree lpwindow
set spantree lptrapenable
show spantree lptrapenable
clear spantree lptrapenable
set spantree disputedbpduthreshold
show spantree disputedbpduthreshold
clear spantree disputedbpduthreshold
show spantree nonforwardingreason
set spantree lp
Use this command to enable or disable the Loop Protect feature per port and optionally, per SID.
Syntax
set spantree lp port-string {enable | disable} [sid sid]
Configuring Spanning Tree Loop Protect Features
2. for more information about the Loop
Enterasys Matrix DFE-Gold Series Configuration Guide 6-65
Refer to page...
6-65
6-66
6-67
6-67
6-68
6-69
6-70
6-70
6-71
6-71
6-72
6-72
6-73
6-73
6-74
6-74
6-75
6-75
6-76
6-76
6-77