Show System - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting Basic Device Properties
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the gratuitous‐arp processing:
Matrix(rw)->clear ip gratuitous-arp

show system

Use this command to display system information, including contact information, power and fan
tray status and uptime.
Syntax
show system
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display system information:
Matrix(rw)->show system
System contact:
System location:
System name:
PS1-Status
-------------
ok
Fan1-Status
-------------
ok
2-34 Startup and General Configuration
PS2-Status
-------------
not installed
show system