Assigning Classification Rules to Policy Profiles
Example
This example shows how to show information about policies allowed on port ge.1.5:
Matrix(rw)->show policy allowed-type ge.1.5
SUPPORTED AND ALLOWED TRAFFIC RULE TYPES
o Means Traffic Rule Type is supported on this bridge port
* Means Traffic Rule Type is supported and allowed on this bridge port
======================================================================
|
+--------------+---+-----------+-----+-----+---+---+-+-----+---+---+-+
|
|
|
|
|
|
|
|
|
|
|
======================================================================
| ge.1.5 |* *|* * * * * *|
set policy allowed-type
Use this command to assign a list of traffic rules that can be applied to the admin profile for one or
more ports.
Syntax
set policy allowed-type port-string traffic-rule rule-list [append | clear]
Parameters
port‐string
traffic‐rule rule‐list
append | clear
Defaults
If append or clear is not specified, rule(s) will be appended to the port's current list.
8-18 Policy Classification Configuration
|
TRAFFIC
|
|
|MAC|
IPX
|
|
|
|
S D
|
|
S S
|S D|S D O O C Y|S D L|S D R|S D|S D|C|T T Y|E L|L T|O|
|R S|R S C C O P|R S O|C S A|R S|R S|M|T O P|T L|A C|R|
|C T|C T K K S E|C T W|R T G|C T|C T|P|L S E|2 C|N I|T|
|---+-----------+-----+-----+---+---+-+-----+---+---+-+
|
|
Port
|1 2|3 4 5 6 7 8|9 0 1|2 3 4|5 6|7 8|9|0 1 2|5 6|7 8|1|
Specifies port(s) on which to apply traffic rules.
Specifies traffic rules to be allowed. This is a numeric value displayed in
the show policy allowed‐type output ("show policy allowed‐type" on
page 8‐17). Entering "none" means that no traffic rules will be allowed
on this port.
(Optional) Appends traffic rule(s) to the port(s) current rules, or clears
specified rules.
RULE
TYPES
|
|
|
|
|IPv6 | IP
|UDP|TCP| | IP
|
|
|
|
|
|
|
|
T|
F|
F|
|
|
1 1|1 1 1|1 1|1 1|1|2 2 2|2 2|2 2|3|
|* * *|* *|* *|*|
set policy allowed-type
|
| |
|
|
| |
|
|
| |
| |
|
|
| |
| |
|E
|
| |
|I|
T|N
|V
|P|
* *|* *|* *|*|
Need help?
Do you have a question about the Enterasys Matrix DFE-Gold Series and is the answer not in the manual?
Questions and answers