Enterasys Matrix DFE-Gold Series Configuration Manual page 222

Setting Auto-Negotiation and Advertised Ability
100tx
100txfd
1000x
1000xfd
1000t
1000tfd
pause
apause
spause
bpause
Defaults
If not specified, all modes of advertised ability will be cleared.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset all advertised ability to default settings on fe.3.4:
Matrix(rw)->clear port advertise fe.3.4
4-36 Port Configuration
(Optional) Clears 100BASE‐TX half duplex mode from the port's
advertised ability.
(Optional) Clears 100BASE‐TX full duplex mode from the port's
advertised ability.
(Optional) Clears 1000BASE‐X, ‐LX, ‐SX, ‐CX half duplex mode from
the port's advertised ability.
(Optional) Clears 1000BASE‐X, ‐LX, ‐SX, ‐CX full duplex mode from the
port's advertised ability.
(Optional) Clears 1000BASE‐T half duplex mode from the port's
advertised ability.
(Optional) Clears 1000BASE‐T full duplex mode from the port's
advertised ability.
(Optional) Clears PAUSE for full‐duplex links from the port's
advertised ability.
(Optional) Clears asymmetric PAUSE for full‐duplex links from the
port's advertised ability.
(Optional) Clears symmetric PAUSE for full‐duplex links from the
port's advertised ability.
(Optional) Clears asymmetric and symmetric PAUSE for full‐duplex
links from the port's advertised ability.
clear port advertise