Configuring SMON
Configuring SMON
Purpose
To configure SMON (Switched Network Monitoring) on the device.
Commands
For information about...
show smon priority
set smon priority
clear smon priority
show smon vlan
set smon vlan
clear smon vlan
show smon priority
Use this command to display SMON user priority statistics. SMON generates aggregated statistics
for IEEE 802.1Q VLAN environments.
Syntax
show smon priority [port-string] [priority priority]
Parameters
port‐string
priority priority
Defaults
•
If port‐string is not specified, SMON statistics for all ports will be displayed.
•
If priority is not specified, statistics for all priority queues will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display SMON priority 0 statistics for 1‐Gigabit Ethernet port 14 in
module 3:
Matrix(rw)->show smon priority ge.3.14 0
Show Priority Statistics
11-8 Network Monitoring Configuration
(Optional) Displays SMON priority statistics being collected by specific
port(s). For a detailed description of possible port‐string values, refer to
"Port String Syntax Used in the CLI" on page 4‐2.
(Optional) Displays SMON statistics based on encoded user priority,
Valid values are 0 ‐ 7.
show smon priority
Refer to page...
11-8
11-9
11-9
11-10
11-11
11-11
Need help?
Do you have a question about the Enterasys Matrix DFE-Gold Series and is the answer not in the manual?