Reset At; Reset In - Enterasys Matrix DFE-Gold Series Configuration Manual

Resetting the Device

reset at

Use this command to schedule a system reset at a specific future time. This feature is useful for
loading a new boot image.
Syntax
reset at hh:mm [mm/dd] [reason]
Parameters
hh:mm
mm/dd
reason
Defaults
• If month and day are not specified, the reset will be scheduled for the first occurrence of the
specified time.
• If a reason is not specified, none will be applied.
Mode
Switch command, Read‐Write.
Examples
Matrix(rw)‐>reset at 20:00 10/12This example shows how to schedule a reset at 8 p.m. on October
12:
Reset scheduled at 20:00:00, Sat Oct 12 2002
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 20:00:00, Sat Oct 12 2002 (in 1 day 5 hours 40 minutes
This example shows how to schedule a reset at a specific future time and include a reason for the
reset:
Matrix(rw)->reset at 20:00 10/12 Software upgrade to 6.1(1)
Reset scheduled at 20:00:00, Sat Oct 12 2002
Reset reason: Software upgrade to 6.1(1)
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 20:00:00, Sat Oct 12 2002 (in 1 day 5 hours 40 minutes

reset in

Use this command to schedule a system reset after a specific time. This feature is useful for
loading a new boot image.
Syntax
reset in hh:mm [reason]
2-96 Startup and General Configuration
Schedules the hour and minute of the reset (using the 24‐hour system).
(Optional) Schedules the month and day of the reset.
(Optional) Specifies a reason for the reset.
reset at