Set Vlan Name; Clear Vlan - Enterasys Matrix DFE-Gold Series Configuration Manual

set vlan name

Examples
This example shows how to create VLAN 3:
Matrix(rw)->set vlan create 3
This example shows how to disable VLAN 3:
Matrix(rw)->set vlan disable 3
set vlan name
Use this command to set or change the ASCII name for a new or existing VLAN.
Syntax
set vlan name vlan-list vlan-name
Parameters
vlan‐list
vlan‐name
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the name for VLAN 7 to green:
Matrix(rw)->set vlan name 7 green

clear vlan

Use this command to remove a static VLAN from the list of VLANs recognized by the device.
Syntax
clear vlan vlan-list
Parameters
vlan‐list
Defaults
None.
Mode
Switch command, Read‐Write.
Specifies the VLAN ID of the VLAN(s) to be named.
Specifies the string used as the name of the VLAN (1 to 32 characters).
Specifies the VLAN ID of the VLAN(s) to be removed.
Creating and Naming Static VLANs
Enterasys Matrix DFE-Gold Series Configuration Guide 7-7