Show Port Discard; Set Port Discard - Enterasys Matrix DFE-Gold Series Configuration Manual

show port discard

show port discard
Use this command to display the frame discard mode for one or more ports.
Syntax
show port discard [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, frame discarded mode will be displayed for all ports.
Mode
Switch command, Read‐Only.
Usage
Ports can be set to discard frames based on whether or not they contain a VLAN tag. They can also
be set to discard both frame types or none of the frames received.
Example
This example shows how to display the frame discard mode for Fast Ethernet port 7 in module 2.
In this case, the port has been set to discard all tagged frames:
Matrix(rw)->show port discard fe.2.7
Port
------------
fe.2.7

set port discard

Use this command to set the frame discard mode on one or more ports.
Syntax
set port discard port-string {tagged | untagged | none | both}
Parameters
port‐string
tagged | untagged |
none | both
Defaults
None.
(Optional) Displays the frame discard mode for specific port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Discard Mode
-------------
tagged
Specifies the port(s) for which to set frame discard mode. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Sets the port(s) to discard tagged or untagged frames, no frames, or
both types of frames.
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Enterasys Matrix DFE-Gold Series Configuration Guide 7-15