Netbios-Name-Server; Netbios-Node-Type - Enterasys Matrix DFE-Gold Series Configuration Manual

netbios-name-server

Example
This example shows how to assign a DNS server at 11.12.1.99 to the "localpool" address pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#dns-server 11.12.1.99
netbios-name-server
Use this command to assign one or more NetBIOS WINS servers to DHCP clients.
Syntax
netbios-name-server address [address2...address8]
no netbios-name-server
Parameters
address
address2...
address8
Defaults
If address2...address8 is not specified, no additional addresses will be configured.
Mode
Router command, Any DHCP configuration mode.
Usage
This command configures DHCP option 44.
The "no" form of this command deletes the NetBIOS WINS server list.
Example
This example shows how to assign a NetBIOS WINS server at 13.12.1.90 to the "localpool" address
pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#netbios-name-server 13.12.1.90

netbios-node-type

Use this command to assign a NetBIOS node (server) type to DHCP clients.
Syntax
netbios-node-type type
no netbios-node-type
Specifies the IP address of a NetBIOS WINS server.
(Optional) Specifies, in order of preference, up to 7 additional NetBIOS
WINS server IP address(es).
Enterasys Matrix DFE-Gold Series Configuration Guide 20-11
DHCP Overview