Show Rmon Event; Show Rmon Event Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring RMON

show rmon event

Use this command to display RMON event entry properties.
Syntax
show rmon event [index]
Parameters
index
Defaults
If index is not specified, information about all RMON entries will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display RMON event entry 3:
Matrix(rw)->show rmon event 3
Index 3
----------------
Owner
Status
Description
Type
Community
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 11‐5 provides an explanation of the command output.
Table 11-5 show rmon event Output Details
Output...
Index
Owner
Status
Description
Type
Community
Last Time Sent
11-24 Network Monitoring Configuration
(Optional) Displays RMON properties and log entries for a specific
entry index ID.
= Manager
= valid
= STP Topology change
= log-and-trap
= public
What it displays...
Index number for this event entry.
Text string identifying who configured this entry.
Whether this event entry is enabled (valid) or disabled.
Text string description of this event.
Whether the event notification will be a log entry, and SNMP trap, both,
or none.
SNMP community name if message type is set to trap.
When an event notification matching this entry was sent.
show rmon event