Set Port Duplex - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting Speed and Duplex Mode
Example
This example shows how to display the default duplex setting for 1‐Gigabit Ethernet port 14 in
module 3:
Matrix(rw)->show port duplex ge.3.14
default duplex mode is full on port ge.3.14.

set port duplex

Use this command to set the default duplex type for one or more ports.
Syntax
set port duplex port-string {full | half}
Parameters
port‐string
full | half
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
This command will only take effect on ports that have auto‐negotiation disabled.
Example
This example shows how to set Fast Ethernet port 17 in module 1 to full duplex:
Matrix(rw)->set port duplex fe.1.17 full
4-26 Port Configuration
Specifies the port(s) for which duplex type will be set. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Sets the port(s) to full‐duplex or half‐duplex operation.
set port duplex