Clear Flowlimit Notification Interval; Clear Flowlimit Stats - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Flow Setup Throttling (FST)

clear flowlimit notification interval

Use this command to reset the SNMP flow limit notification interval to the default value of 120
seconds.
Syntax
clear flowlimit notification interval
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the SNMP flow limit notification interval:
Matrix(rw)->clear flowlimit notification interval

clear flowlimit stats

Use this command to reset flow limiting statistics back to default values on one or more port(s).
Syntax
clear flowlimit stats [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, statistics will be reset on all ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset flow limiting statistics back to default values on Fast Ethernet
port 5 in module 1:
Matrix(rw)->clear flowlimit stats fe.1.5
24-34 Security Configuration
(Optional) Resets flow limiting statistics on specific port(s).
clear flowlimit notification interval