Clear Radius-Snooping Flow; Show Radius-Snooping - Enterasys Matrix DFE-Gold Series Configuration Manual

clear radius-snooping flow

clear radius-snooping flow
Use this command to clear all entries or the specified index entry from the RS flow table.
Syntax
clear radius-snooping flow {all | index}
Parameters
all
index
Defaults
None.
Mode
Read‐write.
Usage
Use the index value to clear flows for a particular port.
Examples
This example clears all flow table entries:
Matrix(rw)->clear radius-snooping flow all
This example clears the flow table entry for index 5:
Matrix(rw)->clear radius-snooping flow 5

show radius-snooping

Use this command to display a general overview of the global RS status.
Syntax
show radius-snooping
Parameters
None.
Defaults
None.
Mode
Read‐Only.
Specifies that all flow table entries are to be cleared.
Specifies a specific flow table index entry to be cleared.
Enterasys Matrix DFE-Gold Series Configuration Guide 26-7
Understanding RADIUS Snooper