Clear Netflow Export-Version; Set Netflow Template - Enterasys Matrix DFE-Gold Series Configuration Manual

clear netflow export-version

Example
This example shows how to set the flow record format to Version 9:
Matrix(rw)->set netflow export-version 9
clear netflow export-version
Use this command to return the NetFlow flow record format used to export data to the default of
Version 5.
Syntax
clear netflow export-version
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
Use the show netflow config command ("show netflow" on page 15‐3) to display the current
NetFlow version.
Example
This example shows how to return the flow record format to Version 5:
Matrix(rw)->clear netflow export-version

set netflow template

Use this command to configure the NetFlow Version 9 template refresh rate and/or timeout
values.
Syntax
set netflow template {[refresh-rate packets] [timeout minutes]}
Enterasys Matrix DFE-Gold Series Configuration Guide 15-9
Configuring NetFlow