Set Port Priority-Queue - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Priority to Transmit Queue Mapping
Examples
This example shows how to display priority queue information for fe.1.7. In this case, the frames
shown with a priority of 0 or 3 are transmitted according to the transmit priority queue of 1 (the
second lowest transmit priority); frames with 1 or 2 priority, at the lowest transmit priority of 0;
frames with 4 or 5 priority, at the second highest transmit priority of 2; and frames with 6 or 7
priority, at the highest transmit priority of 3:
Matrix(rw)->show port priority-queue fe.1.7
fe.1.7
----------
This example shows how to display the transmit queues associated with priority 3.
Matrix(rw)->show port priority-queue 3
fe.1.7
----------
fe.1.8
----------
fe.1.9
----------

set port priority-queue

Use this command to map 802.1D (802.1p) priorities to transmit queues.
Syntax
set port priority‐queue port‐string priority queue
22-6 Port Priority and Rate Limiting Configuration
Priority TxQueue
-------- -------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
Priority TxQueue
-------- -------
3 1
Priority TxQueue
-------- -------
3 1
Priority TxQueue
-------- -------
3 1
set port priority-queue