Show Lldp Port Tx-Tlv - Enterasys Matrix DFE-Gold Series Configuration Manual

show lldp port tx-tlv

Mode
Switch command, Read‐Only.
Usage
Ports are enabled to send LLDP notifications with the set lldp port trap command and to send
LLDP‐MED notifications with the set lldp port med‐trap command.
Example
This example shows how to display LLDP port trap information for all ports.
Matrix(ro)->show lldp port trap
Trap-Enabled Ports
MED Trap-Enabled Ports:
show lldp port tx-tlv
Use this command to display information about which optional TLVs have been configured to be
transmitted on ports.
Syntax
show lldp port tx-tlv [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, TLV configuration information will be displayed for all ports.
Mode
Switch command, Read‐Only.
Usage
Ports are configured to send optional TLVs with the set lldp port tx‐tlv command.
Example
This example shows how to display transmit TLV information for three ports.
Matrix(ro)->show lldp port tx-tlv ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
Ports
:
(Optional) Displays information about TLV configuration for one or a
range of ports.
Port Sys Sys Sys Mgmt Vlan Pro
Link Layer Discovery Protocol and LLDP-MED
MAC PoE Link Max
Enterasys Matrix DFE-Gold Series Configuration Guide 3-19
MED MED MED MED