Show Cos Unit - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Policy Class of Service (CoS)
Table 8-5 show cos port-type Output Details
Output...
Supported rate types
Eligible ports
Unselected ports

show cos unit

Use this command to display Class of Service units of measure information, including rate type,
minimum and maximum limits of the port groups, and their respective granularity.
Syntax
show cos unit [irl | txq] [port-type index]
Parameters
irl | txq
port‐type index
Defaults
If not specified, all rate limiting information for all port types and CoS units of measure will be
displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to show all Class of Service IRL unit of measure information:
Matrix(rw)->show cos unit irl
Port Type
---------
0
0
0
0
1
1
1
1
8-26 Policy Classification Configuration
What it displays...
Unit of measure supported by the port type.
Which device ports meet this port type criteria.
Which ports have not been assigned user-defined port configuration
settings,
(Optional) Displays inbound rate limiting or transmit queue
information.
(Optional) Displays information for a specific port type.
Displays the unit of measure as percentage of total bandwidth, or
kilobits, megabits, or gigabits per second.
Type Unit Maximum Rate
---- ---- ------------
irl Gbps 10
irl Mbps 10000
irl Kbps 10000000
irl perc 100
irl Gbps 10
irl Mbps 10000
irl Kbps 10000000
irl perc 100
Minimum Rate Granularity
------------ -----------
1 1
1 1
5121024 1
1 1
1 1
1 1
5121024 1
1 1
show cos unit