show cos state
For information about...
clear cos violation irl
clear cos all-entries
show cos state
Use this command to display the Class of Service enable state.
Syntax
show cos state
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to show the Class of Service enable state:
Matrix(rw)->show cos state
Class-of-Service application is enabled
set cos state
Use this command to enable or disable Class of Service.
Syntax
set cos state{enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable Class of Service:
Matrix(rw)->set cos state enable
Enables or disables Class of Servic.e
Enterasys Matrix DFE-Gold Series Configuration Guide 8-23
Configuring Policy Class of Service (CoS)
Refer to page...
8-40
8-41