Set Cos Reference Txq; Clear Cos Reference Txq - Enterasys Matrix DFE-Gold Series Configuration Manual

set cos reference txq

Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear all Class of Service inbound rate limiting reference entries:
Matrix(rw)->clear cos reference irl all
set cos reference txq
Use this command to set a Class of Service inbound rate limiting reference configuration.
Syntax
set cos reference txq group-type-index reference queue number
Parameters
group‐type‐index
reference
queue number
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to configure inbound rate limiting reference resource entry 0 for port
group 0.1 referencing resources defined by TXQ entry 0:
Matrix(rw)->set cos reference irl 0.1 0 queue 0

clear cos reference txq

Use this command to clear one or all non‐default Class of Service transmit queue reference
configurations.
Syntax
clear cos reference txq {all | group-type-index reference}
Specifies a transmit queue port group/type index for this entry. Valid
entries are in the form of group.type. Group can be 0‐7, with 0
designating the default group, and 1‐7 reserved for user‐defined
groups. Default port type values cannot be changed, and are 0 for the
7GR4270‐12, 7G4270‐12, 7G4270‐09, and 7G4270‐10 DFE modules, and 1
for all other modules.
Specifies a reference number to be associated with this entry.
Specifies a transmit queue resource ID to bind to this entry.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-37
Configuring Policy Class of Service (CoS)